3/31/2021 0 Comments Creation Pcut Software
Operating instructions.14 6.1 Name and functions of parts.14 6.2 Basic operation16 6.3 Operating instructions.19 6.4 Technical features26 7.Default USB port is COM:3, some old version of sign soft-wave, no support USB, like WenTai,only support COM:1 and COM: 2, solution is follow: Log system Properties.To better your work, please use the standard knives we confirm, but not those with poor quality.
When computer transmits information to the cutting plotter, the cutting plotter must be in online state. To save present set system parameters, pressPAUSEbutton to escape setting mode in off-line state, then pressON LINEbutton once. When switching on machine next time, it will automatically call in the parameters which were set last time as default for starting up. ![]() Clickplotting outputonce, a plotting output picture will pop up (2). Exterior 220 V input voltage is too low (150V), the plotter will restart thus lock up happen. But long period using it may produce a trace therefore roughing the stripe cushion, so some nicks become deep, while some become shallow. We purchased several inexpensive units, mid grade units, and top of the line units in the 24 width. Since we purchased these, our very own cutter expert Nick Horvath has been putting them to the test. Not as durable as a Servo motor on mid grade or pro grade units, and quite a bit louder, but a stepper does the job for cutting vinyl nicely. You really do not want to use a machine with a stepper motor to constantly cut Twill, Rhinestone templates, Sandblast material, etc. An optic eye makes cutting around an image printed on vinylpaper very easy by reading crop marks that are printed along with your design. Creation Pcut Software Software To AllowThere is software to allow cutters without an optic eye to do this, and there is even a model with a laser attached near the blade holder, but it is not as accurate as using an optic eye. I have personally found that while a cutter may state say 500 grams of force that does not necessarily equate to being able to cut thicker materials, nor does it reference the durability of the motor to constantly withstand the maximum force. The only setting that you cannot set on the machine is offset. You need to adjust this setting in your software, which in the case of this cutter is SignBlazer Elements. However, I was not able to get this cutter to work with graphics software such as Corel Draw. An interesting note is that the unit has a red button on each side of the cutter carriage. If the cutter head runs into it, the whole machine resets or locks up. I didnt like this feature and it seems to be the case with many of the inexpensive brands. My take on it is that the manufacturer was aware that these machines will not communicate perfectly with all software, so they have these buttons as a failsafe in case the machine runs the head to the side of the machine. This way the unit either locks up or resets instead of possibly ruining the motor. It has a maximum downforce of 500 grams and a speed of 20 IPS. However, you are not able to set this unit up as a printer in Windows, so you are unable to send jobs to it from graphics software such as Corel Draw or Adobe Illustrator. The only difference is that the control panel is on the right side as opposed to the top right, and it also has a laser pointer mounted next to the blade holder for contour cutting. Also, it only has a maximum of 400 grams of downforce, where the PCUT 24 has a maximum of 500. The Laserpoint 24 is also slightly slower at a maximum speed of 16 IPS. The unit sells for 419, so I guess you could say that it costs about 70 since this is the difference between the price of this machine and the PCUT. The cutter has a maximum downforce of 250 grams, and speed of 16 IPS right on par with the others.It has USB and Serial ports as well and it has the material sensor to tell the machine whether or not material is loaded. It can be set up as a printer in Windows, which means that you can send jobs directly from graphics software such as Corel Draw and Adobe Illustrator.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |